Atlas Hyper dd XLR

New product

  • 4 central multi-core conductors of high purity OCC copper
  • Terminated with low-mass solder-free XLR plugs
  • DD (‘dual drain’) system
  • 100% copper/Mylar™ foil and screen
  • XLR plugs are wired as follows by default: Pin 1 = Ground; Pin 2 = Hot, Pin 3 = Cold

More details

By buying this product you can collect up to 1420 loyalty points. Your cart will total 1420 loyalty points that can be converted into a voucher of S$ 71.00.


S$ 1,100.00

Add to wishlist

Data sheet

Capacitance (pF/m) :71.54 pF/m
Connector :Aluminium alloy body with precision-fit OFC/OCC connectors
Construction :Twin twisted pair multicore, dual drain
Conductor Material :6n OCC Copper
Dielectric :PEF
Outer Diameter :10.0mm
Resistance (Ohms/m) :0.0239 Ohms/m
Inductance (µH/m) :0.33350.542 µH/m
Velocity of propagation :0.682
Screening :OFC 94.2% – 252 strands
WarrantyLimited 5 Years

More info

Balanced connector with optimum audio performance via ‘trickle-down’ dd technology

The Atlas Hyper dd is constructed with four central multi-core conductors of high purity OCC (Ohno Continuous Casting) copper encapsulated within a low-loss foamed Polyethylene dielectric, with excellent immunity to interference and noise, making it ideally suited to longer cable runs The cable is terminated with our low-mass solder-free XLR plugs.

Atlas dd (‘dual drain’) system: Normally screened cables suffer from screen distortion when they are prepared for production. (If you've ever wired a plug or connector which uses a screened cable, you've done this yourself, cutting back and probably twisting the screening braid for termination). This distortion of the screen has a measurable impact, effectively changing the impedance and therefore the performance of the cable.

Our ‘dd’ configuration is based on a simplified version of the techniques we developed for our top-of-the-range Mavros and Asimi interconnects. Twin symmetrical drain wires (each attached to 180° segments of the plug) are inserted between a 100% copper/Mylar™ foil and screen. The unique dd system connects the screen effectively to the cable return/plug interface, meaning the cable can be terminated without distorting, twisting or mechanically stressing the precision-laid screen. The benefits are in maintaining a consistent low impedance load to the plug, and a total 360° screening against noise and signal loss caused by RFI (Radio Frequency Interference).

Atlas use cold-weld terminations wherever possible, including our current generation ‘dark Chrome’ XLR connectors. By reducing the number of materials and break points in the signal path, our objective its to minimise discontinuity and loss in the signal path, resulting in more consistent construction and improved audio performance.


Note: Atlas XLR plugs are wired as follows by default: Pin 1 = Ground; Pin 2 = Hot, Pin 3 = Cold.

Reviews

Write a review

Atlas Hyper dd XLR

Atlas Hyper dd XLR

  • 4 central multi-core conductors of high purity OCC copper
  • Terminated with low-mass solder-free XLR plugs
  • DD (‘dual drain’) system
  • 100% copper/Mylar™ foil and screen
  • XLR plugs are wired as follows by default: Pin 1 = Ground; Pin 2 = Hot, Pin 3 = Cold

30 other products in the same category: