This product is no longer in stock
By buying this product you can collect up to 649 loyalty points. Your cart will total 649 loyalty points that can be converted into a voucher of S$ 32.45.
|Height :||140 mm|
|Width :||395 mm|
|Depth :||190 mm|
|Product Weight :||5.4 kg per single speaker, 7 kg per packed pair|
|Frequency Response :||70 Hz – 30 kHz|
|Tweeter :||25mm soft dome with high-temperature voice coil, ferrofluid cooling and neodymium magnet system|
|Woofer :||2 x 101mm Epos mid bass drivers, with 25mm high-temperature voice coil and polypropylene cone|
|Sensitivity :||88dB / 2.83V@1m|
|Impedance :||4 ohms|
|Maximum Input Power :||60W|
Within the K-Series are a number of new technologies developed to allow superior performance over previous models.
Epos have found that, if properly implemented, High Velocity Slot Ports (HVSP) can produce dramatic improvements over conventional cylinder ports. HVSP achieves lower audible distortion, by virtue of its lower intrinsic drag and reduced turbulent airflow within the port. HVSP can also lower air loading to the mid and bass drivers, which helps to keep them operating in a more linear region throughout their excursion range.
In a departure from earlier designs, the port is now located on the front baffle of the cabinet. Using a front firing port, the K-Series offers more flexibility with room placement. They can indeed by positioned closer to a wall, without restricting their operation.
The clever clamping mechanism used to secure the drivers has resulted in an even distribution of tension applied to the surface of the basket. This uniformed clamping pressure helps to reduce unwanted vibrations that would normally result in higher levels of distortion. The end result is a beautifully clear and transparent mid-range quality.
Cabinet colouration is a critical area of a loudspeakers design, that is sometimes overlooked; but not with the K-Series. Not only are the K-Series cabinets carefully braced internally, they have also been developed with removable rear baffles. This is an idea dating back to the ES11 days of Epos, with its sandwich construction method. The theory is to reduce the energy absorbed by the cabinet. One way to achieve this is by making the rear baffle a separate element in the construction. The aim is a reduction in cabinet colouration, or unwanted resonance.
Further performance increases have been achieved with the implementation of high quality crossover components, including the selection of very high-grade polypropylene capacitors and metal oxide resistors. As standard, the K-Series comes pre-wired with Oxygen Free multi-stranded copper wire. Specially designed cable management holes inside the cabinet and high current connectors allow for aftermarket replacement cable sets to be installed, if required.